• Automated Flash Chromatography Brand: BIOTAGE,
    Model: Isolera
    Automated Flash Chromatography The model Isolera uses BIOTAGE’s Accelerated Chromatographic Isolation system for material purification. Isolera is an automated flash system designed to purify synthesis reaction mixtures, natural product extracts, and other organic compound mixtures from milligram to multi-gram quantities.
  • Thermogravimetry and Differential Scanning Calorimetry Brand: NETZSCH,
    Model: STA 449 F3 Jupiter
    Thermogravimetry and Differential Scanning Calorimetry The simultaneous thermal analyzer STA 449 F3 Jupiter from NETZSCH allows the measurement of mass changes and thermal effects between -150°C and 2400°C. The flexibility resulting from the various sensors, the variety of sample crucibles and the wide TGA-measuring range make the system applicable for analysis of a vast range of materials. Easily interchangeable sample holders allow optimal system adaption to diverse application areas (TGA, TGA-DTA and TGA-DSC measurements).
  • Cold Trap Freeze Dryer Brand: LABCONCO,
    Model: CentriVap
    Cold Trap Freeze Dryer The CentriVap Cold Trap freeze dryer from LABCONCO, collects evaporated liquid from a CentriVap Concentrator, protecting an accessory vacuum pump and the laboratory environment from the corrosive effects of vapors and fumes emitted from samples. The Trap may also be used for freeze drying and desiccation.
  • Potentiostat/Galvanostat Brand: Autolab,
    Model: PGSTAT302N
    Potentiostat/Galvanostat This high end, high current potentiostat/galvanostat, with a compliance voltage of 30 V and a bandwidth of 1 MHz is specially designed for electrochemical impedance spectroscopy.
  • Rotary Evaporator Brand: Heidolph,
    Model: Hei-VAP-Precision
    Rotary Evaporator The Hei-VAP Precision rotary evaporator provides a wide range of parameters for ensuring reproducible applications and fully automated processes including integrated vacuum control. Solutions with different boiling points can be identified and distilled.
  • Centrifuge Brand: Eppendorf,
    Model: 5810R
    Centrifuge Eppendorf Centrifuge 5810 R is a refrigerated 3 liter centrifuge for both tubes and plates with a compact footprint.
  • Microwave Synthesizer Brand: Biotage,
    Model: Initiator Eight
    Microwave Synthesizer This tool is a rapid microwave-assisted organic synthesizer that is ideal for material and method development. It is designed to heat reagents up to 300 °C in just a few seconds and a pressure up to 30 bar.
  • Schlenk Lines Brand: Glassware,
    Model: Glassware
    Schlenk Lines A Schlenk line consists of a dual manifold with several ports. One manifold is connected to a source of purified inert gas, while the other is connected to a vacuum pump.
  • Gas Chromatograph Brand: Agilent Technologies,
    Model: 7890B
    Gas Chromatograph The 7890B Gas Chromatograph (GC) System features accurate temperature controls and precise injection systems – plus enhanced Electronic Pneumatic Control (EPC) modules for the best retention times.
  • Semi-Automated Mask Alignment System Brand: EV Group,
    Model: EVG620NT
    Semi-Automated Mask Alignment System The EVG620NT Semi Automated Mask Alignment System handles sizes of substrates starting from less than 5 mm up to 150 mm. It offers features, including a granite base, active vibration isolation and linear motors to meet higher precision and throughput requirements.
  • Resist Bake Module Brand: EV Group,
    Model: EVG 105
    Resist Bake Module The EVG 105 is ideally suited for softbake, post-exposure bake and hardbake processes.
  • Semi-Automated Hot Embossing System Brand: EV Group,
    Model: EVG 510HE
    Semi-Automated Hot Embossing System The EVG510HE semi-automated hot embossing system is designed for embossing and nanoimprinting applications.
  • Photolithography Spray Coater Brand: EV Group,
    Model: EVG101
    Photolithography Spray Coater The EVG101 is an advanced resist processing system that performs automated spin coating/spray coating/developing processes in a single chamber design. The EVG101 supports wafers up to 300 mm in size.
  • TGA/DSC Brand: TA Instruments,
    Model: Discovery
    TGA/DSC The Discovery TGA features a thermobalance, IR-heated furnace and an autosampler with good flexibility and reliability. The standard Discovery Gas Delivery Module provides 2-gas switching, or optional 4-gas switching/blending capabilities for atmospheric control. Control and monitoring of TGA experiments works via the user friendly Discovery User Interface.
  • Hall Effect Measurement Brand: Lake Shore,
    Model: 8400 Series
    Hall Effect Measurement The Lake Shore 8400 Series can be used with both DC and AC field Hall measurement methodologies. The system includes fully integrated instrumentation, a magnet and power supply.
  • Benchtop SEM Brand: NeoScope,
    Model: JCM-5000
    Benchtop SEM The NeoScope JCM-5000 benchtop SEM complements both optical microscopes and traditional SEMs in the lab, and can be configured for advanced analytical applications.
  • Thin Film Reflectometer Brand: Ocean Optics,
    Model: NanoCalc-XR
    Thin Film Reflectometer NanoCalc-XR is based on spectroscopic reflectometry to accurately determine optical or non-optical thin film thickness and is suitable for applications in a variety of semiconductor applications.
  • Optical Microscope Brand: Zeiss,
    Model: Axio observer Z1M
    Optical Microscope Microscope Axio Observer.Z1 for brightfield, phase contrast, differential interference contrast and fluorescence imaging. This microscope features a wide range of magnification objectives, flexible accessory ports and digital image acquisition (CCD).
  • Stereomicroscope Brand: Zeiss,
    Model: Discovery V-20
    Stereomicroscope This stereomicroscope is designed for optimal depth perception and maximum zoom range. A 20:1 zoom range allows to go from largest overview into the smallest details.
  • Spectrofluorometer Brand: Horiba,
    Model: Fluoromax-4
    Spectrofluorometer The Horiba FluoroMax 4 spectrometer allows for measuring fluorescence of solids, liquids, powders and thin films. The instrument is controlled by FluorEssenceTM software with Origin embedded for sophisticated data analysis.
  • Spectrofluorometer Brand: Horiba,
    Model: Nanolog
    Spectrofluorometer The Nanolog is a highly modular photoluminescence system, which allows interchanging a versatile range of computer-controlled accessories to measure the steady-state and time-resolved fluorescence of solids, powders, thin-films and liquids.
  • Photoelectron Spectroscopy in Air Brand: Hitachi,
    Model: AC-2
    Photoelectron Spectroscopy in Air The Model AC-2 is an instrument for Photoelectron Spectroscopy at atmospheric pressure that is with an open counter detector and a UV source.
  • Ellipsometer M2000 Brand: J. A. Woollam,
    Model: M-2000 DI
    Ellipsometer M2000 The J. A. Woollam M-2000 DI spectroscopic ellipsometer provides fast and accurate thin film characterization over a wide spectroscopic range.
  • Scanning Probe Microscope (TERS, SNOM, AFM) Brand: NT-MDT,
    Model: NTEGRA Spectra
    Scanning Probe Microscope (TERS, SNOM, AFM) The NTEGRA provides a unique combination of scanning probe with Raman spectroscopy and laser confocal microscopy to study the distribution of chemical properties with nanometer resolution.
  • Atomic Force Microscope Brand: NT-MDT,
    Model: Next
    Atomic Force Microscope The Next is designed to facilitate AFM measurements with user friendly control features such as an automated approach of the cantilever to the surface and high resolution optical microscope positioning.
  • Atomic Force Microscope Brand: Bruker,
    Model: Dimension Icon with ScanAsyst
    Atomic Force Microscope The Atomic Force Microscope System - Bruker Dimension Icon with ScanAsyst® for scanning probe microscopy is capable of nanoscale surface topography and morphology measurements of a range of different surface types producing high resolution, three-dimensional images by scanning a sharp probe over the sample surface.
  • UV-Vis-NIR Spectrophotometer Brand: Varian,
    Model: Cary 6000i
    UV-Vis-NIR Spectrophotometer The Cary 6000i is a high-performance UV-Vis-NIR spectrophotometer equipped with a narrow band InGaAs detector in addition to a photomultiplier tube for improved linearity and measurements in the range 175 – 1800 nm.
  • UV-Vis-NIR Spectrophotometer Brand: Varian,
    Model: Cary 5000
    UV-Vis-NIR Spectrophotometer The Cary 5000 is a high performance UV-Vis-NIR spectrophotometer. Using two light sources (Deuterium UV lamp and QI Vis lamp) on the excitation side and a photomultiplier tube and a PbS NIR detector on the detection side, it can measure the optical transmittance of thin-films and liquids in the extended photometric range 175 – 3300 nm.
  • X-ray Fluorescence Brand: Bruker,
    Model: M4 TORNADO
    X-ray Fluorescence The M4 TORNADO is an analytical tool for sample characterization using small-spot Micro X-ray Fluorescence (Micro-XRF) to obtain information on composition and element distribution.
  • 3D Optical Profiler Brand: Bruker,
    Model: ContourGT-X8
    3D Optical Profiler The ContourGT model is a 3D optical microscope based on white light interferometry (WLI) technology.
  • Plasma Enhanced Chemical Vapor Deposition (PECVD) Brand: MVS Systems Inc.,
    Model: N/A
    Plasma Enhanced Chemical Vapor Deposition (PECVD) This multi-chamber Deposition System (Cluster Tool) is designed to deposit thin-film semiconductors (e.g., a-Si, nc-Si, p+Si, n+Si) and dielectrics (e.g., SiNx, SiOx) by PECVD, transparent conducting oxides (ITO, AZO), and metals (Al) by sputtering.
  • Atomic Layer Deposition (ALD) Brand: Picosun,
    Model: N/A
    Atomic Layer Deposition (ALD) ​Atomic layer deposition (ALD) is a highly controlled thin film deposition method, in which a film is grown on a substrate by exposing its surface to alternate gaseous species (typically referred to as precursors).
  • Oxford Plasma Etcher Brand: Oxford Instruments,
    Model: Plasmalab System 100
    Oxford Plasma Etcher The Oxford Instruments Inductively Coupled Plasma Reactive Ion Etch system is typically used for etching Si3N4, SiO2 and Si. The tool is load-locked and is configured to handle 4-inch wafers.
  • Wet Benches - Silicon Etching and Cleaning Brand: JST Manufacturing, Inc.,
    Model: STO185R0 - STO186R0 - STO187R0 - STO188R0
    Wet Benches - Silicon Etching and Cleaning Multiple industry standard JST chemical work, etching and cleaning stations are available for processing single wafers.
  • Ellipsometer IR-VASE Brand: J. A. Woollam,
    Model: IR-VASE
    Ellipsometer IR-VASE The J. A. Woollam IR-VASE® spectroscopic ellipsometer combines the chemical sensitivity of FTIR spectroscopy with thin film sensitivity of spectroscopic ellipsometry.
  • Ellipsometer VUV-VASE Brand: J. A. Woollam,
    Model: VUV-VASE
    Ellipsometer VUV-VASE The J. A. Woollam VUV-VASE® variable angle spectroscopic ellipsometer is ideally suited for optical characterization of lithographic thin films. It measures wavelengths from vacuum ultraviolet (VUV) to near infrared (NIR).
  • Inkjet Printer Brand: Dimatix,
    Model: DMP-3000
    Inkjet Printer The DMP-3000 features a larger printable area of 300 x 300 mm with a positional accuracy and repeatability of ± 5 µm and ± 1 µm, respectively.
  • Large Inkjet Printer Brand: Dimatix,
    Model: DMP-5000
    Large Inkjet Printer ​The DMP-5000 has a printable area of 500 x 500 mm and maintains a positional accuracy and repeatability of ± 5 µm and ± 1 µm, respectively.
  • Scanning Electron Microscopy Brand: Zeiss,
    Model: Auriga
    Scanning Electron Microscopy This Zeiss Auriga workstation is a crossbeam high resolution SEM equipped with Focus Ion Beam (FIB) column and EDS allowing for unique imaging possibilities, advanced analytics and precise processing at a nanoscale level.
  • Rapid Thermal Processing (RTP) Brand: Jipelec (SEMCO Technologies),
    Model: JetFirst 200
    Rapid Thermal Processing (RTP) The Jipelec JetFirst 200 benchtop RTP features a temperature measurement and control system using pyrometers and thermocouples to provide accurate and repeatable thermal behavior from low to high temperatures.
  • Screen Stencil Printer Brand: AUREL AUTOMATION,
    Model: VS1520A
    Screen Stencil Printer The series VS screen-stencil printer offers high quality in fine-line printing of thick films, solar cells, wafers, glass, metal, etc.
  • Stereomicroscope Brand: Zeiss,
    Model: AX10
    Stereomicroscope A particularly interesting feature of this optical microscope is the noticeably improved three-dimensional image perception. It helps the user to prepare and manipulate samples. Image acquisition is supported by a 8:1 zoom range. The selectable click-stops for discrete magnification steps allows the user to calibrate pixel sizes in the imaging software packages ZEN and AxioVision.
  • Contact Angle Measurement Brand: KRUSS,
    Model: DSA100
    Contact Angle Measurement The Drop Shape Analyzer DSA100 from KRUSS is a high-quality instrument for analyzing wetting and adhesion on solid surfaces.
  • Water Vapor Permeability Brand: MONCO,
    Model: Permatran 3/33 MG+
    Water Vapor Permeability This two cell water vapor transmission rate (WVTR) testing system is ideal for testing flat films, finished packages and components. It consists of 3 separate master instruments which can be expanded up to 9 satellite units, providing a total of 20 cells.
  • Oxygen Permeability Brand: MOCON,
    Model: OX-TRAN® Model 2/21
    Oxygen Permeability This OX-TRAN® Model 2/21 Series is an oxygen transmission rate (OTR) testing system, ideal for high barrier testing for both flat film and finished packages. It consists of 6 separate master instruments each with a different test range. Each master can be expanded with up to 9 satellite units, providing a total of 20 cells per range.
  • Dektak Stylus Profiler Brand: BRUKER,
    Model: Dektak 8
    Dektak Stylus Profiler The Dektak 8 profiler from BRUKER, characterizes film thickness, roughness, stress and defects on samples up to 200 mm (8 inches) in length.
  • Tencor Stylus Profiler Brand: TENCOR,
    Model: P-7
    Tencor Stylus Profiler The P-7 stylus profiler from TENCOR is a surface measurement system with 150 mm scan length standard. It offers good measurement repeatability and reliable height measurement performance. Its sensor includes dynamic force control, excellent linearity, and high vertical resolution. Finally, this stylus profiler's surface measurement system includes point-and-click operation.
  • Scanning Kelvin Probe and Surface Photovoltage Spectroscopy Brand: KP Technology,
    Model: Kelvin Probe
    Scanning Kelvin Probe and Surface Photovoltage Spectroscopy The Kelvin probe is a non-contact, non-destructive vibrating capacitor device used to measure the work function (WF) of conducting materials or surface potential (SP) of semiconductor or insulating surfaces. This system from KP Technology offers a WF resolution of 1-3 meV. The high-resolution 3-axis translation stage allows performing 50 x 50 mm 2D scans. The Kelvin probe is set up inside a Faraday and light enclosure to prevent from unwanted electromagnetic interferences.
  • BoTest I-V Measurement Brand: BoTest,
    Model: LIV
    BoTest I-V Measurement The LIV from BoTest is a system for functionality testing of organic electronics. It establishes characterization data for OLEDs, OPVs, organic sensors, and other organic semiconductor devices.
  • Solar Simulator, I-V Measurement Brand: Oriel,
    Model: Sol3A
    Solar Simulator, I-V Measurement Oriel Sol3A solar simulators use a single lamp design to meet Class A requirements for three performance criteria without compromising the 1 Sun output power. This solar simulator fulfills class AAA, with the first letter representing Spectral performance, the second letter Uniformity of Irradiance, and the third letter Temporal Stability.
  • IQE-EQE Brand: Newport,
    Model: Oriel IQE-200
    IQE-EQE The equipment permits simultaneous measurements of both the external quantum efficiency (EQE) and the internal quantum efficiency (IQE) of solar cells, detectors, or any photon-to-charge converting devices.
  • Paios—Electrical Device Characterization Brand: FLUXiM,
    Model: Paios
    Paios—Electrical Device Characterization The Paios system from Fluxim performs a variety of electrical and opto-electronic techniques ideally suited for thin-film device characterization.
  • Vacuum e-Beam Deposition Brand: Angstrom Engineering,
    Model: Amod e-Beam Deposition
    Vacuum e-Beam Deposition We are using our e-Beam deposition system to deposit thick films of all kinds of metals, and many metal oxides for solar cell applications.
  • Vacuum Sputter Deposition System Brand: Angstrom Engineering,
    Model: Amod Sputter Deposition
    Vacuum Sputter Deposition System Our system is configured to support two types of sputter deposition: RF sputtering, DC sputtering. Each of these deposition methods uses a process sputter gas, which is usually an inert gas like argon with reactive gases added for certain processes.
  • Thermal Evaporator Brand: Angstrom Engineering,
    Model: Amod Thermal evaporator
    Thermal Evaporator We carry various thin film deposition systems from Angstrom Engineering for thermally depositing a wide range of materials including metals, organic and inorganic small molecules. The deposition rate is controlled using quartz crystal sensors to ensure consistent, high-quality film formation.